Genfitt Tap Fed Pressure Washer News Aoife Gallagher Apr 22 2022 Genfitt Tap Fed Pressure Washer The Genfitt Tap Fed Petrol Pressure Washer delivers powerful results and is easy to use. Ideal for all cleaning tasks around the house, garage or farm. 2,700PSI. Product: G19791 & G19792. Instructions: Required: • Water Supply • Hose kit with two garden connections 1. First carefully read through the instruction manual provided and follow all safety checks. 2. Always check your oil and fuel levels before operating. 3. Set up your pressure washer close to your water tap supply on a level position. 4. With the high-pressure outlet hose connected, connect an inlet garden hose via the garden hose connections. WATER MUST BE TURNED ON PRIOR TO STARTING YOUR ENGINE 5. Turn on your water supply tap, pull the spray trigger to ensure water is moving the through the lines and out the nozzle without any leaks before starting the unit. Now your pump is primed. 6. To start the machine, turn the switch to the ON position on the side of the engine. Check to ensure fuel valve is in the ON position and if starting cold, apply the choke. 7. Brace the unit with your foot and ensure that you are completely balanced on a flat surface. Pull recoil cord slowly until resistance is felt and then pull rapidly to avoid kickback. Once the engine is running, disengage the choke lever. 8. Watch our YouTube video for more info. Available to buy now on our website genfitt.co.uk or by contacting your local sales rep.